Problem solver

My growkit is not growing

The short answer

A kit with no pins after two weeks is almost always too cold. Check that it sits at 22–26 °C, then make sure it gets indirect light, some fresh air once a day and enough humidity. If the conditions are right and nothing happens after three to four weeks, a 12-hour cold soak can restart it.

Applies to: all kit typesLast checked: 18 November 2026
No pins
What it isA stalled kit, usually too cold
Is the kit OK?Yes, if the mycelium is white
Do this nowCheck the temperature

Check in this order

  1. Temperature

    Put a thermometer next to the bag. Below 20 °C, warm it up: heat mats.

  2. Time

    Some strains and cool rooms need up to three weeks. If the mycelium is white and firm, the kit is alive.

  3. Fresh air

    Mushrooms need oxygen to start. Open the bag and fan it once a day.

  4. Light

    Indirect daylight or about 12 hours of room light a day.

  5. Humidity

    You should see fine drops on the inside of the bag. If not, mist the walls.

  6. Cold soak

    Still nothing after three to four weeks in good conditions? Soak the kit in cold water for 12 hours, drain and start again.

Other causes

  • The kit was stored too long before starting.
  • The kit was frozen or overheated in transport.
  • Mold you cannot see yet is competing with it: look for any colour other than white.

Questions people ask

Why is my growkit not growing?

Usually because it is too cold. Below 20 °C kits can stall for weeks.

How long before pins appear?

Usually 5–12 days at 22–26 °C, sometimes up to three weeks.

GK

Written and checked by the Growkit.net editors
Last checked: 18 November 2026 · How we work